# Dab Temperature Chart: Recommended °F & °C by Concentrate Type

> A dab temperature chart with recommended °F and °C ranges for live rosin, live resin, shatter, badder, diamonds and more — plus terpene boiling points.

- Canonical page: https://dabritebti.com/guides/dab-temperature-chart
- Author: Dab Rite BTI
- Published: 2026-09-02
- Updated: 2026-09-02

## Content

This chart shows recommended dabbing temperature ranges for the most common concentrate types, in both Fahrenheit and Celsius. Most concentrates fall between 500°F and 600°F (260–316°C), with flavor-forward extracts like live rosin and sauce toward the lower end and crystalline THCA diamonds toward the higher end. Use it as a starting point — the exact best temperature for any specific product is the one its maker recommends. Save or bookmark this page as a quick reference, and look up product-specific temperatures on the Best Temp Index . How to read this chart Every number below is a quartz surface temperature on a hot start, measured with an infrared thermometer aimed at the banger. That basis matters more than the numbers themselves: Cold starts read lower. Load first, then heat, and the material typically vaporizes around 400–500°F on the thermometer. Applying the hot-start numbers below to a cold start will overshoot badly. Different materials read differently. Ceramic, titanium, and thick-bottom quartz all hold and transfer heat differently, and an e-rig's set point is not the same as a measured surface temp . The surface is hotter than the hash. The concentrate never reaches the surface temperature you're reading — which is why the working ranges sit well above the terpene boiling points further down this page. That last point is the reason most published dab-temp charts contradict each other by 100 degrees or more: they never say what they're measuring. Dab temperature chart by concentrate type Concentrate type Recommended range (°F) Recommended range (°C) Why Sauce / terp sauce / HTFSE 500–540°F 260–282°C Extremely terpene-rich — keep it low to protect flavor. Live rosin (solventless) 500–550°F 260–288°C Flavor-forward; low temps preserve the terpene profile. Live resin 510–560°F 266–293°C High terpene content; low-to-mid keeps it tasty. Pressed rosin 520–570°F 271–299°C Similar to live rosin, slightly more flexible. Distillate 520–580°F 271–304°C Usually low in terpenes; a wide, forgiving range. Badder / batter / budder 530–580°F 277–304°C Whipped textures shine in the low-mid range. Crumble 540–590°F 282–310°C Drier texture benefits from slightly more heat. Shatter 550–600°F 288–316°C Stable and less terp-forward; mid range works well. Diamonds / THCA 580–640°F 304–338°C Crystalline THCA needs the most heat to vaporize fully — but it still chars above 650°F. Diamonds sitting in sauce should be run at sauce temps. These are general, community-consensus starting ranges — not lab-exact settings. The optimal temperature for a specific batch depends on how it was made and its terpene content, which is why maker-recommended temperatures (published on the Best Temp Index) are more precise than any one-size chart. Temperature bands at a glance Band Range (°F) Range (°C) Best for Very low ("terp sip") 450–500°F 232–260°C Aroma and tasting notes only; leaves material behind Low (flavor) 500–550°F 260–288°C Taste, smoothness, terpene preservation Mid (balanced) 550–600°F 288–316°C An all-purpose mix of flavor and vapor High (clouds) 600–650°F 316–343°C Maximum vapor and intensity, at the cost of flavor Too hot 650°F+ 343°C+ Nothing. Above this you char the concentrate instead of vaporizing it On the numbers you'll see elsewhere: many dab temp charts list bands running to 700°F or 750°F. Those aren't flavor-versus-clouds tradeoffs — they're combustion. Past roughly 650°F the vapor turns acrid, the terpenes are long gone, and you're left with black reclaim in the banger. Terpene boiling-point reference Why do these ranges work? Because the terpenes that give concentrates their flavor each vaporize at a different temperature. This chart shows approximate atmospheric boiling points for common cannabis terpenes — a big part of why lower-temperature dabs taste more like the strain. Two things to notice. First, the light monoterpenes (pinene, myrcene, limonene, terpinolene) come off first, so they're the first flavors you lose when you run hot. Second, the heavier sesquiterpenes (caryophyllene, humulene) boil far higher — up in the same neighborhood as the low end of the dab ranges above. That's the real reason the flavor window sits around 500–550°F rather than down at 350°F: you need surface heat well above a compound's boiling point to move the whole profile into vapor fast enough to inhale, and the surface always runs hotter than the material itself. Terpene Class Approx. boiling point (°F) (°C) Typical aroma α-Pinene Monoterpene 311°F 155°C Pine, rosemary Myrcene Monoterpene 332°F 167°C Earthy, musky, mango Limonene Monoterpene 349°F 176°C Citrus Terpinolene Monoterpene 366°F 186°C Herbal, floral Linalool Monoterpenoid 388°F 198°C Lavender, floral β-Caryophyllene Sesquiterpene 505°F 263°C Pepper, spice α-Humulene Sesquiterpene 509°F 265°C Hops, woody Boiling points are approximate and vary by source, purity, and pressure — many figures circulating online are actually vacuum-distillation values measured at reduced pressure, which is why you'll see caryophyllene listed as low as 320°F elsewhere. This table uses atmospheric-pressure approximations and is meant to show the relative order in which terpenes vaporize, not to serve as lab-precise measurement. How to use this chart Find your concentrate type in the first table and note the range. Start at the low end of that range — you can always go hotter on the next pull. Measure, don't guess. Use an infrared thermometer (like the Dab Rite PRO) to hit the number reliably, and make sure you're comparing hot start to hot start. Get product-specific. For the exact temperature the maker intended, scan the QR code on the label or search the product on the Best Temp Index . This chart is for flavor and experience guidance only and is not medical or health advice. Ranges and boiling points are approximate and provided for reference. Intended for adults in legal markets. Want the exact temperature, not just a range? Look up maker-recommended dab temps on the Best Temp Index →

## FAQ

**What is a good dab temperature chart range for most concentrates?**

Most concentrates fall between 500°F and 600°F (260–316°C) at the surface. Flavor-forward extracts like live rosin, live resin, and sauce do best at 500–560°F, while crystalline THCA diamonds need 580–640°F to vaporize fully.

**What temperature should I dab in Celsius?**

For most concentrates, aim for roughly 271–304°C for a flavor-and-vapor balance. Flavor-focused dabs run cooler (260–288°C); big-cloud dabs run hotter (316–343°C).

**Why do diamonds need a higher temperature than rosin?**

THCA diamonds are crystalline and require more heat to vaporize fully, so they sit at the high end (580–640°F). Live rosin is terpene-rich and flavor-forward, so it's run low (500–550°F) to avoid burning off those terpenes.

**If terpenes boil around 300–500°F, why is the dab range higher?**

Because the number on your thermometer is the surface temperature, not the temperature the concentrate reaches. Heat transfers into the material for only a moment during a dab, so the surface has to sit meaningfully above a compound's boiling point to vaporize it quickly and completely.

**Are these dab temperatures exact?**

No — they're general starting ranges for a measured quartz surface on a hot start. The optimal temperature for a specific product depends on how it was made. Maker-recommended temperatures on the Best Temp Index are the precise answer for a given concentrate.

## Reference

- [All guides](https://dabritebti.com/guides): Every Dab Rite BTI guide